• For the frame and bracket to fit to the bead and glass, a minimum of 25mm clearance from the glass is required free of obstruction eg. handles, locks etc

• Seals must not protrude over the glass by more than 6mm. If the seal is compressible, you can take a “bead to bead measurement. If not, then take a “seal to seal” measurement.

• Using milimeter mm unit of measuremt, Measure both width and drop accurately, we recommend the use of of a metal tape measure.

• Measure both corners and the middle and use the smallest measurement taken.Take 3 point measurment of the width then the drop and use the smallest measurment for your order.Avoid rounding off your measurements and take it to the last digit of the mm measurment. This will be your Width and Drop blinds sizes 

• To measure the window depth measure the face of window frame to the glass (normally range from 18mm to 24mm).Use a bank card or a ruller and place it accross the window frame corner and meausre it from the glass to the edge of the card or ruler. This will determine the window fixing brackets required.This will be your depth size meausurements

Please note that the video is for the purpose of illustration only and different windows may have different results and depending on the skill level of the person assembling and doing the installation.  Please call us for any inquiries.